HP 8753E - Modify Calibration Kit Menu

4. Store the modified calibration kit.
For a step by step procedure on how to modify calibration kits, refer to “Modifying Calibration
Kit Standards” located in Chapter 5, “Cptimizing Measurement Results. n
Modify Calibration Kit Menu
. . .,. / _
_
,., _
'I'& ~~~~~~~~~~~~~ softkey h the cd kit menu provides access to the modify cabration kit
. . . .
'....::~.~:.....~...~~:.P
menu. This leads in turn to additional series of menus associated with modifying calibration
kits The following is a description of the softkeys located within this menu:
.f<.; :,:;;<; ,:;.: ..,. ..:_:
i /i.;;.; ..1. ~. .~
n ~~~~~~;~.~~~~~., makes the standard number the active function, and brings up the
:...
..i . . . . . . . . . i....:~..~~~....:..::..:~.
T :./ . . . . .
define standard menus. Before selecting a standard, a standard number must be entered.
This number (1 to 8) is an arbitrary reference number used to reference standards while
specifying a class. The standard numbers for the predeilned calibration kits are as follows:
1 short(m)
2 open(m)
3 broadband load
4 thru
5 sliding load
6 lowband load
7 short(f)
8 open (0
Note
Although the numbering sequences are arbitrary, confusion can be mhdmized
by using consistency. However, standard 5 is always a sliding load.
:,:,
~~~~~~~~~~~: leads to the specify class menu. After the aa&&s me mo&fied, use this
key to specify a class to group certain standards
.,. .,. .,. _ _ .,.,.... .,..
. . . . . . . . . . . . . . . . . . . . . . . . _
~~~~~~~~~ leads to the label class menu, to give the class a meaningfuI label for future
I ._.. ;:..:..:. .m..::.:::..:
;;;.-i.~;~~..~~~~~~~~.
reference.
_ _ ..,.,. ,. _ . . ..,
~~~~~~~~ leads to a menu for constructing a label for the user-modified cal kit. If a label
i
is supplied, it will appear as one of the five softkey choices in the select cal kit menu. The
approach is similar to defining a display title, except that the kit label is limited to ten
characters.
~~~~~~~~~~ brings up the m Option menu.
j~:~.~~:.~,.~:.~~,.~~~~;;~;;~~~:,~~,~,.~;~,.~~~~~:.~;~~~:.~,.~,.,~,.; .;.;
:< .,,,~.,.,,,.,.,,,,.,.,,.,,,,,. _
~~~,:;~~~~~,~~,;~~~~~~~~~~ tern-&&es the cabration kit m&&&ion process, after a,ll
. . . . . . . . . . . . . _.____..~~ . . . . . . . . . . . . . . . . ;;.>;.;;~~~;..>~ . . . . ..(.........(.(.,.,(.(.(.,.(.,. ;;;; ,,,,.,.,,,,,,.,.,.,_,,
",_ .,.,,.,.,.,.,,
standards are deilned and all classes are specified. Be sure to save the kit with the
:: :,.. .::.:..; ,... ;.;.; . . . . . . . . . . ..A.. i,,;.,.,.,.,.,.,;.; . . . . .;. . . . . . . . . . . . . . . . . . . . . . . . ..~. . . . .
. . . .,.,,. /..
~~~~~~~~~~ ,&&ey, if it & to be us& later.
*.. . . . . . . . . . . . . ..i i . . . . . . . . . . . . . .
. . . i..... ii.
2;; . . . . . . :.... . . ..A . . . . . . . . . . . ii i . . . . . . . . ;~.;~~~ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..~~~....~....~.~..~..~.
6.64 Application and Operation Concepts