Using the Instrument State Functions
m
INSTRUMENT
STATE-
R-L---T--S-
. .
HP-15
STATUS
pg61
19d
Figure 6-58. Instrument State Function Block
The instrument state function block keys provide control of channel-independent system
functions. The following keys are described in this chapter:
n
(System):
Limit lines and limit testing, time domain operation, and instrument modes.
w
m):
HP-IB controller modes, instrument addresses, and the use of the
parallel
port.
w
LSep]:
Test
sequencing.
Information on the remaining instrument state keys can be found in the following chapters:
w
m:
Chapter 12,
“Preset State and Memory Allocation”
w
m:
Chapter 4,
“Printing, Plotting, and Saving Measurement Results”
n
~~~:
Chapter 4,
“Printing, Plotting, and Saving Measurement Results”
6.110
ApplicationandOperationConcepts
To Next Page
Loading...
