Transistor Test Fixtures
The following Hewlett-Packard transistor test
fixtures
are compatible with the HP 8753E.
Additional test fixtures for transistors and other devices are
avaiIable
from Inter-Continental
Microwave.
lb
order their catalog, request HP literature number 5091-4254E.
Or
contact
Inter-Continental Microwave as
follows:
1515 Wyatt Drive
Santa Clara, CA 95054-1524
(tel) 408 727-1596
(fax) 408 727-0105
HP
11600B
and
11602B
lkansistor
Fixtures.
These
IIxtures
are used to hold devices for S-parameter measurements in a 50 ohm coaxial
circuit. They can be used to measure bipolar or field-effect transistors in several
confIgurations,
from dc to 2.0
GHz.
The HP
11600B
accepts transistors with
TO-18
to
TO-72
package
dimensions, and the HP
11602B
accepts transistors with
To-5
to
TO-12
package dimensions.
Both
IIxtures
can
also
be used to measure other circuit elements such as diodes, resistors, or
inductors, which have 0.016 to 0.019 inch diameter leads.
HP
11608A
Option
003
Transistor Fixture.
This
IIxture
is designed to be
user-milled
to hold
striphne
transistors for S-parameter
measurements Option 003 is
pre-miIIed
for 0.205 inch diameter disc packages, such as the
HP
HPAC-200.
HP
11868A
Transistor Fixture Adapter.
This adapter provides a rigid RF cable interconnection between the HP 8753E test port
connectors and the HP
116OOB,
11602B,
or
11608A
transistor
llxture.
Power Limiters
The following power limiters are designed to protect the analyzer from damage due to
excessive input power.
APC-7,
DC Coupled
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HP
11930A
Type-N, DC Blocked . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HP
11930B
Compatible Peripherals
11-3
To Next Page
Loading...
