HP 8753E - Channel Stimulus Coupling

Channel Stimulus Coupling
‘. . . . . . . . ,‘.::::...’ .) ,,
~~~~~~~~~~.;~~~:~~~; toggles the primary channel coupling of stimulus values. With
/..: ,,.......; ..,............. ::.:I:.:.:::.: ..A...
.../. *. i /
.&@#$&R~#~~~~.~~~ (the preset condition), both primary channels have the same stimulus values.
(The inactive primary channel and its auxiliary channel takes on the stimulus values of the
active primary channel.)
In the stimulus coupled mode, the following parameters are coupled:
frequency
number of points
source power
number of groups
IF bandwidth
sweep time
trigger type
gating parameters
sweep type
power meter calibration
Coupling of the stimulus values for the two primary channels is independent of
.:.::. I I i ,, i
._/,.,..,.,.,; _,
:* ‘5 .$;m $y ;,. “; “I
~~~~~~~:~~~~~~:~,~~.in the &play menu and ~~-t~;.in the marker mode menu.
:.: ,,,.. :.;a.: :;.:.::..:..~:..:::: :.. . . . . . . . . . . . .._.._~
: ..,... .:: .:::::: .ii . . . . . . . . . .:.a ii 2s . . . . .w:..>;: ii 1 .A.. .w>: . . . . s.;;> . . . . . . . . . . . . . . i.. ,./i.~.~UL.
:,>:: / ;:: .: ,,. ,,,,, /::.::. . .
,., ,, ,,, ;;, ..; . . . . . __ ..~. ..: .: .v..:;.
~~?~~~~~~~~ activates an alternate sweep function when dual channel display is on. In
this mode the analyzer alternates between the two sets of stimulus values and displays the
measurement data of both primary channels.
Application and Operation Concepts 6-21