HP 8753E - Instrument Specifications

‘lhble 7-12. HP 8753E Instrument Specifications (1 of 6)
Del3cription
?RF.QUENCY CHARACI’JIRISTICS
TEST PORT OUTPUT
SpS?d0cstioll
Code
Standard
Option 006
Accuracy (at 26 OC l 6 W)
Stability
O~to66~C
per y-r
Resolution
xJTPuT POWER CHARACTJUWrIcst $
30kHzto3GHz
S-l
30kHzt.~6GHz
S-l
f10 ppm S-l
f7.6 ppm
T
f3 mm
T
1HZ
s-3
U:
Standard
-86to +lOdBm
S-l
option 076 -S6to +SdHm
S-l
Resolution
0.06 dl3
s-3
Level Accuracy (at 0 dBm output level) (at 26 “C f 6 “C)t fl.O dH
S-1.
Linearity (at 26 OC f6 “C)*
-16t.o +SdBm
f0.2 dl? (relative to 0 dHm output level) Sl
+Sto +lOdBm(Standard)
f0.6 dH (relative to 0 dHm output level) S-l
+ 6 to + 8 dE%m (Option 076)
f0.6 dl3 (relative to 0 dBm output level) S-l
Impedance
Standard
6Oohms: >16dESreturnlossto3GHz
T
>14dBreturnlossto6GHz
T
Impedance
Option 076 76ohms: >lOdBreturnlossto3OOkHz T
>16dBreturnloseto3GHz
T
IPECTRAL PURITY CHA&WTERIsIICS
2nd Harmonic (16 MHz to 3 GHz)
at + 10 dBm output level
at 0 dE!m output level
at - 10 dBm output level
3rd Harmonic (16 MHz to 2 Ghz)
<-26 dJ3c S-1’
<-40 dBc T
<-60 dHc T
at + 10 dBm output level
at 0 dBm output level
at -10 dBm output level
Non-Harmonic Spurious %gnals
Mixer Related
at + 10 dBm output level
at -10 dBm output level
<-26 dBc S-1.
<-40 dHc T
<-I50 dBc T
<-30 dBc T
<-66 dHc
T
Explicitly tested as part of an on& verikation performed by Hewlett-Pachrd.
Hewlett-Packard verifies source output performance on port 1 only. Port 2 output performance is typical.
Typical 30 kHz to 300 kHz and typical from 2 to 3 GHz for Option 076.
740 Specifications and Measurement Uncertainties