HP 8753E - Example of Setting the Reference Value Using a Marker; Setting the Display Reference Value

Setting the Display Reference Viilue
1. Press (j.GLXGFctn_) and turn the front panel knob, or enter a value from the front panel
keypad to position the marker at the value that you want for the analyzer display reference
value.
.... .<<.. ;:y;.. .: ..-..:..
2. Press ~~,~~~ to change the reference value to the value of the active marker.
.,...s... . . . . . i < . . . .
.::.x.:i . . . . . . . (6 :x..:..
..,.,.,<.: .i
Figure 2-22. Example of Setting the Reference Value Using a Marker
2-30 Making Measurements