HP 8753E - Example of Searching for the Maximum Amplitude Using a Marker; Searching for the Maximum Amplitude

‘lb Search for a Specific Amplitude
These functions place the marker at an amplitude-related point on the trace. If you switch on
tracking, the analyzer searches every new trace for the target point.
Searching for the Maximum Amplitude
1. Press CMarker Fct”, ,~~~;:~~~’ to acCeSS the marker search menu.
,/ .A.. . . . . . . T....... ., ,, ,,,, ..ws/i ,.
2. Press ~~~~~:.~~ to move the active marker to the maximum point on the measurement
trace.
Example
of
Figure 2-24.
Searching for the Maximum Amplitude Using
a Marker
232 Making Measurements