HP 8753E - Plotting One Measurement Per Page Using a Pen Plotter

To Reset the Plotting Parameters to Default Values
‘lhble 4-5. Plotting Parameter Default Values
I-
Marker
I 7 I
Plotting One Measurement Per Page Using a Pen Plotter
1. Configure and define the plot, as explained in “Configuring a Plot Function” and “Defining a
Plot Function” located earlier in this chapter.
0 If you d&r& the ~~~~~~~:~~~~.:. press ~~~~~~~~~~:~~~~~ after the message COPY
. . . . . . . . i..~~....................... . . . . .w.. . . . . /:........ .:. .:....::..::: .._............................
OUTPUT COMPLETED appears.
4-16 Printing, Plotting, and Saving Measurement Results