Units
The analyzer can input and output data in basic units such as Hz,
dB,
seconds, ohms,
etc.
S
Seconds
HZ
Hertz
v Volts
DB
dBordBm
Input data is assumed to be in basic
units
unless one of the following units expressions
qualifies
the data input (upper and lower case are equivalent):
MS Milliseconds
kHz
Kilohertz
US Microseconds
MHz Megahertz
NS Nanoseconds
GHz
Gigahertz
PS
Picoseconds
FS
Femtoseconds
HP-II3
Debug Mode
An HP-IB diagnostic feature (debug mode) is available in the HP-IB menu. Activating the debug
mode causes the analyzer to scroll incoming HP-IB commands across the display. Nonprintable
characters are represented with a a. Any time the analyzer receives a syntax error, the
commands halt, and a pointer indicates the misunderstood character. See the
HP
87533
Network
Analyzer
Programmer’s
Guide
for information on correct programming syntax.
User Graphics
Refer to the
HP
8753E
Programmer’s
Gu$&
for information on using user graphics.
1
l-24
Compatible Peripherals
To Next Page
Loading...
