Caution
‘Lb
prevent connector damage, use an adapter (HP part number 1250-1462) as a
connector saver for R CHANNEL IN.
NETWORK ANALYZER
pg634e
Figure 3-20. Connections for the First Portion of Conversion Compression Measurement
5.
lb
view the absolute input power to the analyzer’s R channel, press:
o
:~~~~~~~~
se&
6. To store a trace of the receiver power versus the source power into memory and view
data/memory, press:
This removes the loss between the output of the mixer and the input to the receiver, and
provides a linear power sweep for use in subsequent measurements
7.
Make the connections as shown in Figure 3-21.
Making Mixer Measurements
3-29
To Next Page
Loading...
