n
Accuracy
q
Accuracy enhancement methods that range from
normalizing
data to complete one or two
port vector error correction with up to 1601 measurement points, and
TRL*/LRM*.
(Vector
error correction reduces the effects of system directivity, frequency response, source and
load match, and crosstalk.)
q
Power meter calibration that allows you to use an HP-IB compatible power meter to
monitor and correct the analyzer’s output power at each data point. (The analyzer stores a
power correction table that contains the correction values.)
w
Printin&
Plotting, and Saving
q
Direct print or plot output of displayed measurement results, with a time stamp if desired,
to a compatible peripheral with a serial, parallel, or HP-IB interface.
q
Instrument states storage in internal memory for the following times, or on disk
indefinitely.
Temperature at 70
“C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
250 days (0.68 year) characteristically
Temperature at 40
OC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1244 days (3.4 years) characteristically
Temperature at 25 “C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
10 years characteristically
q
LIF/DOS
disk formats for saving instrument states and measurement data.
q
Integration of a high capacity micro-floppy disk drive.
HP
5753E
Description and Options
l-3
To Next Page
Loading...
