HP 8753E - Page 649

‘Ihble 12-3. Preset Conditions (1 of 5)
Preset Conditions
Analyzer Mode
Analyzer Mode
Frequency Offset
Operation
Offset Value
Harmouic Operation
Preset Value
Network Analyzer Mode
Off
0
Off
stimulus conditions
Sweep Type
Linear Frequency
Display Mode
start/stop
TriggerType
Continuous
ExternalTrigger
Off
Sweep Time
100 ms, Auto Mode
Start Frequency 30 kl-lz
Frequency Span (1.) 2999.97 MHz
Frequency Span (Opt. 006) 6999.97 MHz
StartTime 0
TimesPan
100 ms
CW Frequency 1000 MHz
Source Power OdBm
Power Slops 0 dB/GHz; Off
Start Power -16.0 dBm
Power Span 26 dB
Coupled Power on
Source Power on
Coupled Channels on
Coupled Port Power
on
Power Bangs Auto;RangeO
Number of Points 201
List Freq sweep Mode
Swept
Frequency List
Frequency List
Empty
Preset Conditions
Edit Mode
Start/Stop, Number of
ltesponse Conditions
Parameter
Conversion
Format
Display
Color Selections
Dual Channel
Active Channel
hdliary Channel
Frequency Blaulz
Split Display
ken&y
Beeper: Done
Beeper: Warning
D2/Dlto D2
[‘itle
[F Bandwidth
IF Averaging Factor
smoothing Aperture
?hase offset
electrical Delay
kale/Division
Preset Value
Points
Channel 1: Sll;
Channe12: S21
Channel3: 512
Channel4 S22
Off
Log Maguitude (all inputs)
Data
Same as before Ipreset_]
Off
Channel 1
Disabled
Disabled
2x
If&to> 16%,-
has no effect. If set to
< lS%LpTeset)
lucreases intensity
to 16%.
on
Off
Off
Channel 1 - mp]
Channel 2 - Empty
87OOEz
16; off
1% SPAN; Off
0 Degrees
Dns
10 dJ3IDivision
124 Preset State and Memory Allocation