HP 9000 Series Service Manual

Chapter 6 6-1
D270/D370, D280/D380/R380 and D390/R390 Front Panel LCD Codes
6
D270/D370, D280/D380/R380 and
D390/R390 Front Panel LCD Codes
This chapter lists PDC Chassis Codes and Error Codes displayed on the system console
and on the front panel LCD display located on the SPU cabinet for models D270/D370
and D280/D380/R380.
Each code consists of four hex digits, D0, D1, D2, and D3. D0 is the Major code category.
The categories are 0 through F and are defined in Table 6-1. The display codes are listed
in numerical order by SPU function within the tables in this chapter.
• The first column of the tables contains the operating state (ostat) of the computer.
The ostat values are:
OFF
FLT (fault)
TEST
INIT (initialize)
SHUT (shutdown)
WARN (warning)
RUN
ALL
• The second column contains the chassis code.
• The third column contains a description of the codes meaning.

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome