HP 9000 Series Service Manual

B-22 Appendix B
Support Information
D200/Dx10/Dx20/Dx30 BCH Commands and Screens
This section shows an example of the menus and screens available on the D200/Dx10/Dx20/Dx30
computers.
----Main Menu----------------------------------------------------------
Command Description
------- -----------
B0ot[PRI|ALT|<path>] Boot from specified path
PAth[PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
TOC Soft boot the system
COnfiguration[<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DISplay Redisplay the current menu
HElp[<menu>|<command>] Display help for menu or command
RESET Restart the system
-----
Main Menu: Enter command >
-------Configuration Menu---------------------------------------------
Command Description
------- -----------
AUto[BOot|SEArch] [ON|OFF] Display or set specified auto flag
BootINfo Display boot-related information
BootTimer [0 - 1000] Seconds allowed for boot attempt
DaTe [c:y:m:d:h:m:[s]] Read or set the real time clock in GMT
DEfault Set the system to predefined values
FastBoot [ON|OFF] Display or set boot tests execution
PAth PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
BOot [PRI|ALT|<path>] Boot from specified path
DISplay Redisplay the current menu
HElp[<menu>|<command>] Display help for menu or command
RESET Restart the system
MAin Return to Main menu
-------
Configuration Menu: Enter command >

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome