HP 9000 Series Service Manual

5-28 Chapter 5
Dx50/Dx60 Front Panel LCD Codes
Table 5-15 HP-UX ISL Boot Codes
Table 5-16 HP-UX System Initialization Codes
Code Description
CB00 Transfer of Control (TOC) initiated by the firmware
CEC0 HP-UX boot has been loaded and initialization begun
CED0 HP-UX boot has entered main
CED2 HP-UX boot is about to configure the I/O system
CED4 HP-UX boot is about to mount the root file system
CEDA HP-UX boot is about to list the contents of a directory
CEDB HP-UX boot is about to load the kernel into memory
CEDC HP-UX boot is about to start a copy operation
CEDD HP-UX boot is about to stop (return to Remote Data Base)
CEDE HP-UX boot is about to return to ISL
CEDF HP-UX boot is about to launch the kernel
Code Description
CEE0 Kernel was loaded and initialization has begun
CEF0 Kernel has entered main
CEF2 Kernel is about to configure the I/O system
CEF4 Kernel is about to mount the root file system
CEF6 Kernel is about to set up the page-out demon
CEF8 Kernel is about to start the initialization process

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome