HP 9000 Series Service Manual

11-14 Chapter 11
SCSI Peripherals and I/O Information
*Seagate (HPA3058A) - 9 - Firmware Error Table 11-11 provides the description for Hardware status
byte 12: (ASC - Additional Sense Code) and Hardware status byte 13: (ASCQ - Additional Sense
Code Qualifier)
Table 11-11 Hardware Status Bytes 12 and 13
ASC ASCQ Description
00 00 No additional sense information
00 00 Lengths did not Match on Read (Sense Key 0)
00 00 Undetermined Hardware Error (Sense Key 4)
00 01 File Mark detected
00 02 End of partition / medium detected
00 03 etmark detected
00 04 Beginning of Partition Detected
00 05 End of data Detected
00 05 Write Mode and Read or Verify was Issued (sense key 5)
00 06 I/O Process Terminated
00 11 Audio Play Operation in Progress
00 12 Audio Play Operation Paused
00 13 Audio Play Operation Successfully Completed
00 14 Audio Play Operation Stopped Due to Error
00 15 No Current Audio Status to Return
01 00 No index/Sector signal
02 00 No seek complete
03 00 Write fault
03 01 No Write Current
03 02 Excessive Write Errors (sense key 3)
04 00 Drive not ready
04 01 Drive in process of becoming ready
04 02 Drive not ready, initializing command required
04 03 Drive not ready, manual intervention required
04 04 Logical Unit Not Ready, Format in Progress
05 00 Logical Unit (LUN) does not respond to selection
07 00 Multiple peripheral devices selected

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome