Appendix B B-33
Support Information
----- Configuration Help ----------------------------------------------
The Configuration menu is used to display and modify the
configuration and state of the system.
Type DIsplay from the Configuration menu to view the commands
available (from the Configuration menu) along with allowed arguments
and command descriptions.
Other menus can be accessed by entering the name of the menu at the
command prompt. From a given menu, a command from any other menu can
be executed by entering the menu name that is associated with the
command, followed by the command.
For example, to execute the WArnings command (in the Information menu)
from the Configuration menu, type "in wa".
Type HElp MAin to see all available commands listed under their
respective menus.
Short command for COnfiguration (menu): co
------
To Next Page
Loading...
