HP 9000 Series Service Manual

B-50 Appendix B
Support Information
8. At the "update>" prompt, enter "run"
9. A warning message will be issued, followed by
Continue ([y]/n)? Enter y.
10.After the tape has been read by the update program, the “update>” prmpt will return. The update
should take approximately 30 seconds. Enter “exit.”
11.The system will automatically reset and theboot process will begin. Boot your system with your
normal process.

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome