HP A5120 EI Series Configuration Guide

190
Protocol packets of STP,54
Protocol-based VLAN configuration example,120
Protocols and standards,147
Protocols and standards,67
Protocols and standards,158
Protocols and standards,173
Q
QinQ frame structure,156
S
Security mode and normal mode of voice VLANs,135
Selective QinQ Configuration Example,164
Setting an encapsulation format for LLDPDUs,177
Setting other LLDP parameters,177
Setting speed options for auto negotiation on an
Ethernet interface,3
Setting the LLDP operating mode,174
Setting the LLDP re-initialization delay,175
Setting the MDI mode of an Ethernet interface,13
Setting the statistics polling interval,9
Shutting down an aggregate interface,39
T
Testing the cable connection of an Ethernet interface,14
Types of MAC address table entries,20
Types of VLANs,102
V
VLAN fundamentals,101
VLAN overview,101
Voice VLAN assignment modes,132
W
Why MSTP,62
Why STP,54

HP A5120 EI Series Specifications

General

Uplink Ports	4 x SFP
Stacking	No
Management	CLI, Web, SNMP
Routing Protocols	RIP, OSPF
Power Supply	AC
MAC Address Table Size	16K
Dimensions	440 x 430 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Model	HP A5120-24G EI Switch (JG234A)
VLANs	4094