EasyManuals Logo

HP A5120 EI Series Configuration Guide

HP A5120 EI Series
197 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
27
To do
Use the command
Remarks
Enter system view
system-view
Enter Layer 2 Ethernet interface
view
interface interface-type interface-
number
Enable MAC Information on the
interface
mac-address information enable {
added | deleted }
Required
Disabled by default.
NOTE:
To enable MAC Information on an Ethernet interface, enable MAC Information globally first.
Configuring MAC Information mode
Follow these steps to configure MAC Information mode:
To do
Use the command
Remarks
Enter system view
system-view
Configure MAC Information mode
mac-address information mode {
syslog | trap }
Optional
trap by default.
Configuring the interval for sending Syslog or trap messages
To prevent Syslog or trap messages from being sent too frequently, you can set the interval for sending
Syslog or trap messages.
Follow these steps to set the interval for sending Syslog or trap messages:
To do
Use the command
Remarks
Enter system view
system-view
Set the interval for sending Syslog
or trap messages
mac-address information interval
interval-time
Optional
One second by default.
Configuring the MAC Information queue length
To avoid losing user MAC address information, when the buffer that stores user MAC address information
reaches capacity, the user MAC address information in the buffer is sent to the monitor end in the
network, even if the timer set for sending MAC address monitoring Syslog or trap messages has not
expired yet.
Follow these steps to configure the MAC Information queue length:
To do
Use the command
Remarks
Enter system view
system-view
Configure the MAC Information
queue length
mac-address information queue-
length value
Optional
50 by default.

Table of Contents

Other manuals for HP A5120 EI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5120 EI Series and is the answer not in the manual?

HP A5120 EI Series Specifications

General IconGeneral
Uplink Ports4 x SFP
StackingNo
ManagementCLI, Web, SNMP
Routing ProtocolsRIP, OSPF
Power SupplyAC
MAC Address Table Size16K
Dimensions440 x 430 x 44 mm
Operating Temperature0°C to 45°C
Operating Humidity10% to 90% non-condensing
ModelHP A5120-24G EI Switch (JG234A)
VLANs4094

Related product manuals