HP GbE2c - Blc Layer 2/3 Fiber SFP Option - Switch TACACS+ Configuration

Configuration Commands 121
Table 134 OSPF Virtual Link Configuration commands
Command Description
no area-virtual-link <1-3> enable
Disables OSPF virtual link.
Command mode: Router OSPF
no area-virtual-link <1-3>
Deletes OSPF virtual link.
Command mode: Router OSPF
show ip ospf area-virtual-link
<1-3>
Displays the current OSPF virtual link settings.
Command mode: All except User EXEC
OSPF Host Entry configuration
NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF Host Entry Configuration commands.
Table 135 OSPF Host Entry Configuration commands
Command Description
host <1-128> address <IP
address>
Configures the base IP address for the host entry.
Command mode: Router OSPF
host <1-128> area <0-2>
Configures the area index of the host.
Command mode: Router OSPF
host <1-128> cost <1-65535>
Configures the cost value of the host.
Command mode: Router OSPF
host <1-128> enable
Enables OSPF host entry.
Command mode: Router OSPF
no host <1-128> enable
Disables OSPF host entry.
Command mode: Router OSPF
no host <1-128>
Deletes OSPF host entry.
Command mode: Router OSPF
show ip ospf host {<1-128>}
Displays the current OSPF host entries.
Command mode: All except User EXEC
OSPF Route Redistribution configuration
NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF Route Redistribution Configuration commands.
Table 136 OSPF Route Redistribution Configuration commands
Command Description
redistribute
{fixed|static|rip} {<1-32>}
Adds selected routing maps to the rmap list.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution list
will be redistributed.
Command mode: Router OSPF
no redistribute
{fixed|static|rip} {<1-32>}
Removes the route map from the route redistribution list.
Removes routing maps from the
rmap list.
Command mode: Router OSPF
[no] redistribute
{fixed|static|rip} export
metric <1-16777215> metric-
type {type1|type2}
Exports the routes of this protocol as external OSPF AS-external LSAs in which
the metric and metric type are specified.
Command mode: Router OSPF