Information Commands 35
Common Internal Spanning Tree information
The following command displays Common Internal Spanning Tree (CIST) information:
show spanning-tree mstp cist information
Command mode: All
Mstp Digest: 0xac36177f50283cd4b83821d8ab26de62
Common Internal Spanning Tree:
VLANs: 1 3-4094
Current Root: Path-Cost Port MaxAge FwdDel
8000 00:03:42:fa:3b:80 11 1 20 15
CIST Regional Root: Path-Cost
8000 00:03:42:fa:3b:80 11
Parameters: Priority MaxAge FwdDel Hops
32768 20 15 20
Port Prio Cost State Role Designated Bridge Des Port Hello Type
---- ---- ---- ------ ---- --------------------- -------- ----- ----
1 128 2000 FWD DESG 8000-00:03:42:fa:3b:80 8001 4 P2P, Edge
2 128 2000 FWD DESG 8000-00:03:42:fa:3b:80 8002
3 128 2000 DSB
4 128 2000 DSB
5 128 2000 DSB
6 128 2000 DSB
7 128 2000 DSB
8 128 2000 DSB
9 128 2000 DSB
10 128 0 DSB
11 128 2000 FWD DESG 8000-00:03:42:fa:3b:80
12 128 2000 DSB
In addition to seeing if Common Internal Spanning Tree (CIST) is enabled or disabled, you can view the following
CIST bridge information:
• Status of Uplink Fast (upfast)
• CIST root
• CIST regional root
• Priority
• Maximum age value
• Forwarding delay
• Hops
You can also refer to the following port-specific CIST information:
• Port number and priority
• Cost
• State
• Role
• Designated bridge and port
• Hello interval
• Link type and port type
To Next Page
Loading...
Need help?
General