Statistics commands 73
The following table describes the VRRP statistics.
Table 64 VRRP statistics
Field Description
vrrpInAdvers The total number of VRRP advertisements that have been received.
vrrpOutAdvers The total number of VRRP advertisements that have been sent.
vrrpBadVersion The total number of VRRP advertisements that had a bad version number.
vrrpBadAddress The total number of VRRP advertisements that had a bad address.
vrrpBadPassword The total number of VRRP advertisements that had a bad password.
vrrpBadAdvers The total number of VRRP advertisements received that were dropped.
vrrpBadVrid The total number of VRRP advertisements that had a bad virtual router ID.
vrrpBadData The total number of VRRP advertisements that had bad data.
vrrpBadInterval The total number of VRRP advertisements that had a bad interval.
RIP statistics
NOTE: RIP commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following command displays RIP statistics:
show ip rip counters
Command mode: All except User EXEC
RIP ALL STATS INFORMATION:
RIP packets received = 12
RIP packets sent = 75
RIP request received = 0
RIP response received = 12
RIP request sent = 3
RIP response sent = 72
RIP route timeout = 0
RIP bad size packet received = 0
RIP bad version received = 0
RIP bad zeros received = 0
RIP bad src port received = 0
RIP bad src IP received = 0
RIP packets from self received = 0
GEA Layer 3 statistics
The following table describes the Layer 3 GEA statistics commands.
Table 65 Layer 3 GEA statistics commands
Command Usage
show ip gea bucket <IP
address>
Displays GEA statistics for a specific IP address.
Command mode: All except User EXEC
show ip gea Displays all GEA statistics.
Command mode: All except User EXEC
To Next Page
Loading...
Need help?
General