HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Guide

Information Commands 30
802.1x information
The following command displays 802.1x information:
show dot1x information
Command mode: All
System capability : Authenticator
System status : disabled
Protocol version : 1
Authenticator Backend
Port Auth Mode Auth Status PAE State Auth State
---- ------------ ------------ -------------- ----------
1 force-auth unauthorized initialize initialize
2 force-auth unauthorized initialize initialize
3 force-auth unauthorized initialize initialize
4 force-auth unauthorized initialize initialize
5 force-auth unauthorized initialize initialize
6 force-auth unauthorized initialize initialize
7 force-auth unauthorized initialize initialize
8 force-auth unauthorized initialize initialize
9 force-auth unauthorized initialize initialize
10 force-auth unauthorized initialize initialize
11 force-auth unauthorized initialize initialize
12 force-auth unauthorized initialize initialize
13 force-auth unauthorized initialize initialize
14 force-auth unauthorized initialize initialize
15 force-auth unauthorized initialize initialize
16 force-auth unauthorized initialize initialize
*17 force-auth unauthorized initialize initialize
*18 force-auth unauthorized initialize initialize
19 force-auth unauthorized initialize initialize
20 force-auth unauthorized initialize initialize
*21 force-auth unauthorized initialize initialize
22 force-auth unauthorized initialize initialize
*23 force-auth unauthorized initialize initialize
*24 force-auth unauthorized initialize initialize
------------------------------------------------------------------
* - Port down or disabled
The following table describes the IEEE 802.1x parameters.
Table 20 802.1x information
Field Description
Port Displays each port’s name.
Auth Mode Displays the Access Control authorization mode for the port.
The Authorization
mode can be one of the following:
• force-unauth
• auto
• force-auth
Auth Status Displays the current authorization status of the port, either
authorized or unauthorized.
Authenticator PAE State Displays the Authenticator Port Access Entity State. The PAE
state can be one of the following:
• initialize
• disconnected
• connecting
• authenticating
• authenticated
• aborting
• held
• forceAuth

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English