HP GbE2c - Blc Layer 2/3 Fiber SFP Option - 802.1 X Statistics

Statistics commands 56
802.1x statistics
Use the following command to display the 802.1x authenticator statistics of the selected port:
show interface port <port number> dot1x counters
Command mode: All
Authenticator Statistics:
eapolFramesRx = 0
eapolFramesTx = 0
eapolStartFramesRx = 0
eapolLogoffFramesRx = 0
eapolRespIdFramesRx = 0
eapolRespFramesRx = 0
eapolReqIdFramesTx = 0
eapolReqFramesTx = 0
invalidEapolFramesRx = 0
eapLengthErrorFramesRx = 0
lastEapolFrameVersion = 0
lastEapolFrameSource = 00:00:00:00:00:00
Authenticator Diagnostics:
authEntersConnecting = 0
authEapLogoffsWhileConnecting = 0
authEntersAuthenticating = 0
authSuccessesWhileAuthenticating = 0
authTimeoutsWhileAuthenticating = 0
authFailWhileAuthenticating = 0
authReauthsWhileAuthenticating = 0
authEapStartsWhileAuthenticating = 0
authEapLogoffWhileAuthenticating = 0
authReauthsWhileAuthenticated = 0
authEapStartsWhileAuthenticated = 0
authEapLogoffWhileAuthenticated = 0
backendResponses = 0
backendAccessChallenges = 0
backendOtherRequestsToSupplicant = 0
backendNonNakResponsesFromSupplicant = 0
backendAuthSuccesses = 0
backendAuthFails = 0
The following table describes the 802.1x authenticator diagnostics for a selected port:
Table 45 802.1x statistics for port
Statistics Description
Authenticator Diagnostics
authEntersConnecting Total number of times that the state machine transitions to the
CONNECTING state from any other state.
authEapLogoffsWhileConnecting Total number of times that the state machine transitions from
CONNECTING to DISCONNECTED as a result of receiving an EAPOL-
Logoff message.
authEntersAuthenticating Total number of times that the state machine transitions from
CONNECTING to AUTHENTICATING, as a result of an EAPResponse/
Identity message being received from the Supplicant.
authSuccessesWhile
Authenticating
Total number of times that the state machine transitions from
AUTHENTICATING to AUTHENTICATED, as a result of the Backend
Authentication state machine indicating successful authentication of the
Supplicant.
authTimeoutsWhileAuthenticating Total number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of the Backend
Authentication state machine indicating authentication timeout.
authFailWhileAuthenticating Total number of times that the state machine transitions from
AUTHENTICATING to HELD, as a result of the Backend Authentication
state machine indicating authentication failure.