HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Guide

Statistics commands 61
Table 48 Interface statistics for port
Statistics Description
UcastPkts—IfHCOut The total number of packets that higher-level protocols requested to be transmitted,
and which were not addressed to a multicast or broadcast address at this sublayer,
including those that were discarded or not sent.
BroadcastPkts—IfHCOut The total number of packets that higher-level protocols requested to be transmitted,
and which were addressed to a broadcast address at this sublayer, including those
that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts.
MulticastPkts—IfHCOut The total number of packets that higher-level protocols requested to be transmitted,
and which were addressed to a multicast address at this sublayer, including those
that were discarded or not sent.
For a MAC layer protocol, this includes both group and functional addresses. This
object is a 64-bit version of ifOutMulticastPkts.
Discards—IfHCOut The number of outbound packets that were chosen to be discarded even though no
errors had been detected to prevent their being transmitted. One possible reason for
discarding such a packet could be to free up buffer space.
Errors—IfHCOut For packet-oriented interfaces, the number of outbound packets that could not be
transmitted because of errors.
For character-oriented or fixed-length interfaces, the number of outbound
transmission units that could not be transmitted because of errors.
Internet Protocol (IP) statistics
Use the following command to display the interface protocol statistics of the selected port:
show interface port <port number> ip-counters
Command mode: All
GEA IP statistics for port 1:
ipInReceives : 0
ipInHeaderError: 0
ipInDiscards : 0
The following table describes the Internet Protocol (IP) statistics for a selected port:
Table 49 IP statistics for port
Statistics Description
ipInReceives
The total number of input datagrams received from interfaces, including those received in error.
ipInHeaderError The number of input datagrams discarded because the IP address in their IP header's destination
field was not a valid address to be received at this entity (the switch).
ipInDiscards The number of input IP datagrams for which no problems were encountered to prevent their
continued processing, but which were discarded (for example, for lack of buffer space). Note
that this counter does not include any datagrams discarded while awaiting re-assembly.

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English