HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Guide

Configuration Commands 91
Table 85 View-based Access Control Configuration commands
Command Description
snmp-server access <1-32
notify-view <1-32 characters>
Defines a 32 character long notify view name that allows you notify access to
the MIB view.
Command mode: Global configuration
no snmp-server access <1-32>
Deletes the View-based Access Control entry.
Command mode: Global configuration
show snmp-server access
<1-32>
Displays the View-based Access Control configuration.
Command mode: All
SNMPv3 Group configuration
The following table describes the SNMPv3 Group Configuration commands.
Table 86 SNMPv3 Group Configuration commands
Command Description
snmp-server group <1-16>
security {usm|snmpv1|snmpv2}
Defines the security model.
Command mode: Global configuration
snmp-server group <1-16>
user-name <1-32 characters>
Sets the user name. The user name can have a maximum of 32 characters.
Command mode: Global configuration
snmp-server group <1-16
group-name <1-32 characters>
The name for the access group. The group name can have a maximum of 32
characters.
Command mode: Global configuration
no snmp-server group <1-16>
Deletes the vacmSecurityToGroup entry.
Command mode: Global configuration
show snmp-server group <1-16>
Displays the current vacmSecurityToGroup configuration.
Command mode: All
SNMPv3 Community Table configuration
These commands are used for configuring the community table entry. The configured entry is stored in the community
table list in the SNMP engine. This table is used to configure community strings in the Local Configuration Datastore
(LCD) of SNMP engine.
The following table describes the SNMPv3 Community Table Configuration commands.
Table 87 SNMPv3 Community Table Configuration commands
Command Description
snmp-server community <1-16>
index <1-32 characters>
Configures the unique index value of a row in this table. The index can have
a maximum of 32 characters.
Command mode: Global configuration
snmp-server community <1-16>
name <1-32 characters>
Defines the name, up to 32 characters.
Command mode: Global configuration
snmp-server community <1-16>
user-name <1-32 characters>
Defines a readable 32 character string that represents the corresponding
value of an SNMP community name in a security model.
Command mode: Global configuration
snmp-server community <1-16>
tag <1-255 characters>
Configures a tag of up to 255 characters maximum. This tag specifies a set of
transport endpoints to which a command responder application sends an
SNMP trap.
Command mode: Global configuration
no snmp-server community
<1-16>
Deletes the community table entry.
Command mode: Global configuration
show snmp-server community
<1-16>
Displays the community table configuration.
Command mode: All

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English