Information Commands 22
SNMPv3 Notify Table information
The following command displays the SNMPv3 Notify Table:
show snmp-server v3 notify
Command mode: All
Name Tag
-------------------- --------------------
v1v2trap v1v2trap
The following table describes the SNMPv3 Notify Table information.
Table 15 SNMPv3 Notify Table information
Field Description
Name The locally arbitrary, but unique identifier associated with this snmpNotifyEntry.
Tag This represents a single tag value which is used to select entries in the snmpTargetAddrTable. Any
entry in the
snmpTargetAddrTable that contains a tag value equal to the value of this entry is
selected. If this entry contains a value of zero length, no entries are selected.
To Next Page
Loading...
Need help?
General