HP GbE2c - Blc Layer 2/3 Fiber SFP Option - OSPF Statistics

Statistics commands 69
The following table describes the IGMP statistics:
Table 61 IGMP statistics
Statistic Description
rxIgmpValidPkts Total number of valid IGMP packets received
rxIgmpInvalidPkts Total number of invalid packets received
rxIgmpGenQueries Total number of General Membership Query packets received
rxIgmpGrpSpecificQueries Total number of Membership Query packets received from specific groups
rxIgmpLeaves Total number of Leave requests received
rxIgmpReports Total number of Membership Reports received
txIgmpReports Total number of Membership reports transmitted
txIgmpGrpSpecificQueries Total number of Membership Query packets transmitted to specific groups
txIgmpLeaves Total number of Leave messages transmitted
OSPF statistics
NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes OSPF statistics commands.
Table 62 OSPF Statistics commands
Command Usage
show ip ospf counters general
Displays OSPF global statistics.
Command mode: All except UserEXEC
show ip ospf counters aindex
[<0-2>]
Displays area index statistics.
Command mode: All except UserEXEC
show ip ospf counters interface
[<1-255>]
Displays interface statistics.
Command mode: All except UserEXEC