HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Guide

Configuration Commands 92
SNMPv3 Target Address Table configuration
These commands allow you to set passwords and display current user statistics. Passwords can be a maximum of 15
characters. To disable a user, set the password to null.
The following table describes the SNMPv3 Target Address Table Configuration commands.
Table 88 SNMPv3 Target Address Table Configuration commands
Command Description
snmp-server target-address
<1-16> address <IP address>
name <1-32 characters>
Configures the locally arbitrary, but unique identifier, target address name
associated with this entry.
Command mode: Global configuration
snmp-server target-address
<1-16> name <1-32
characters> address
<transport IP address>
Configures a transport address IP that can be used in the generation of SNMP
traps.
Command mode: Global configuration
snmp-server target-address
<1-16> port <transport
address port>
Configures a transport address port that can be used in the generation of SNMP
traps.
Command mode: Global configuration
snmp-server target-address
<1-16> taglist <1-255
characters>
Configures a list of tags (up to 255 characters maximum) that are used to select
target addresses for a particular operation.
Command mode: Global configuration
snmp-server target-address
<1-16> parameters-name <1-
32 characters>
Defines the name.
Command mode: Global configuration
no snmp-server target-
address <1-16>
Deletes the Target Address Table entry.
Command mode: Global configuration
show snmp-server target-
address <1-16>
Displays the current Target Address Table configuration.
Command mode: All
SNMPv3 Target Parameters Table configuration
You can configure the target parameters entry and store it in the target parameters table in the SNMP engine. This
table contains parameters that are used to generate a message. The parameters include the message processing
model (for example: SNMPv3, SNMPv2c, SNMPv1), the security model (for example: USM), the security name, and
the security level (noAuthnoPriv, authNoPriv, or authPriv).
The following table describes the SNMPv3 Target Parameters Table Configuration commands.
Table 89 SNMPv3 Target Parameters Table Configuration commands
Command Description
snmp-server target-parameters
<1-16> name <1-32 characters
Configures the locally arbitrary, but unique identifier that is associated with
this entry.
Command mode: Global configuration
snmp-server target-parameters
<1-16> message
{snmpv1|snmpv2c|snmpv3}
Configures the message processing model that is used to generate SNMP
messages.
Command mode: Global configuration
snmp-server target-parameters
<1-16> security
{usm|snmpv1|snmpv2}
Selects the security model to be used when generating the SNMP messages.
Command mode: Global configuration
snmp-server target-parameters
<1-16> user-name <1-32
characters>
Defines the name that identifies the user in the USM table, on whose behalf
the SNMP messages are generated using this entry.
Command mode: Global configuration

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English