Information Commands 49
The following table describes the RMON History Information parameters.
Table 40 RMON History Information
Command Usage
Index
Displays the index number that identifies each history instance.
IFOID
Displays the MIB Object Identifier.
Interval
Displays the time interval for each for each sampling bucket.
Rbnum
Displays the number of requested buckets, which is the number of data slots into which data is to be saved.
Gbnum
Displays the number of granted buckets that may hold sampled data.
RMON alarm information
The following command displays RMON alarm information:
show rmon alarm
Command mode: All
RMON Alarm group configuration:
Index Interval Type rLimit fLimit rEvtIdx fEvtIdx last value
----- -------- ---- -------- -------- ------- ------- ----------
1 30 abs 10 0 1 0 0
2 900 abs 0 10 0 2 0
3 300 abs 10 20 0 0 0
4 1800 abs 10 0 1 0 0
5 1800 abs 10 0 1 0 0
8 1800 abs 10 0 1 0 56344540
10 1800 abs 10 0 1 0 0
11 1800 abs 10 0 1 0 0
15 1800 abs 10 0 1 0 0
18 1800 abs 10 0 1 0 0
100 1800 abs 10 0 1 0 0
Index OID
----- ------------------------------
1 1.3.6.1.2.1.2.2.1.10.257
2 1.3.6.1.2.1.2.2.1.11.258
3 1.3.6.1.2.1.2.2.1.12.259
4 1.3.6.1.2.1.2.2.1.13.260
5 1.3.6.1.2.1.2.2.1.14.261
8 1.3.6.1.2.1.2.2.1.10.280
10 1.3.6.1.2.1.2.2.1.15.262
11 1.3.6.1.2.1.2.2.1.16.263
15 1.3.6.1.2.1.2.2.1.19.266
18 1.3.6.1.2.1.2.2.1.10.279
100 1.3.6.1.2.1.2.2.1.17.264
To Next Page
Loading...
Need help?
General