HP GbE2c - Blc Layer 2/3 Fiber SFP Option - CPU Statistics; ACL Statistics; SNMP Statistics

Statistics commands 76
CPU statistics
The following command displays the CPU utilization statistics:
show mp cpu
Command mode: All except User EXEC
CPU utilization:
cpuUtil1Second: 8%
cpuUtil4Seconds: 9%
cpuUtil64Seconds: 8%
The following table describes the management port CPU utilization statistics:
Table 70 CPU statistics
Statistics Description
cpuUtil1Second The utilization of MP CPU over 1 second. This is shown as a percentage.
cpuUtil4Seconds The utilization of MP CPU over 4 seconds. This is shown as a percentage.
cpuUtil64Seconds The utilization of MP CPU over 64 seconds. This is shown as a percentage.
ACL statistics
The following command displays the statistics for Access Control Lists (ACLs):
show access-control counters
Command mode: All except User EXEC
Hits for ACL 1: 26057515
Hits for ACL 2: 26057497
SNMP statistics
The following command displays SNMP statistics:
show snmp-server counters
Command mode: All except User EXEC
SNMP statistics:
snmpInPkts: 54 snmpInBadVersions: 0
snmpInBadC'tyNames: 0 snmpInBadC'tyUses: 0
snmpInASNParseErrs: 0 snmpEnableAuthTraps: 0
snmpOutPkts: 54 snmpInBadTypes: 0
snmpInTooBigs: 0 snmpInNoSuchNames: 0
snmpInBadValues: 0 snmpInReadOnlys: 0
snmpInGenErrs: 0 snmpInTotalReqVars: 105
snmpInTotalSetVars: 0 snmpInGetRequests: 2
snmpInGetNexts: 52 snmpInSetRequests: 0
snmpInGetResponses: 0 snmpInTraps: 0
snmpOutTooBigs: 0 snmpOutNoSuchNames: 2
snmpOutBadValues: 0 snmpOutReadOnlys: 0
snmpOutGenErrs: 0 snmpOutGetRequests: 0
snmpOutGetNexts: 0 snmpOutSetRequests: 0
snmpOutGetResponses: 54 snmpOutTraps: 0
snmpSilentDrops: 0 snmpProxyDrops: 0