Information Commands 20
SNMPv3 Group Table information
The following command displays SNMPv3 group information:
show snmp-server v3 group
Command mode: All
Sec Model User Name Group Name
---------- ----------------------------- -------------------------------
snmpv1 v1v2only v1v2grp
usm adminmd5 admingrp
usm adminsha admingrp
A group is a combination of security model and security name that defines the access rights assigned to all the
security names belonging to that group. The group is identified by a group name.
The following table describes the SNMPv3 Group Table information.
Table 11 Group Table parameters
Field Description
Sec Model Displays the security model used, which is any one of: USM, SNMPv1, SNMPv2, and SNMPv3.
User Name Displays the name for the group.
Group Name Displays the access name of the group.
SNMPv3 Community Table information
The following command displays SNMPv3 community information:
show snmp-server v3 community
Command mode: All
Index Name User Name Tag
---------- ---------- -------------------- ----------
trap1 public v1v2only v1v2trap
This command displays the community table information stored in the SNMP engine.
The following table describes the SNMPv3 Community Table information.
Table 12 Community Table information
Field Description
Index Displays the unique index value of a row in this table.
Name Displays the community string, which represents the configuration.
User Name Displays the User Security Model (USM) user name.
Tag Displays the community tag. This tag specifies a set of transport endpoints from which a command
responder application accepts management requests and to which a command responder
application sends an SNMP trap.
To Next Page
Loading...
Need help?
General