HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Guide

Configuration Commands 124
IGMP filtering configuration
The following table describes the IGMP Filter Configuration commands.
Table 140 IGMP Filtering commands
Command Description
ip igmp profile <1-16>
Configures the IGMP filter.
Command mode: Global configuration
ip igmp filtering
Enables IGMP filtering globally.
Command mode: Global configuration
no ip igmp filtering
Disables IGMP Filtering globally.
Command mode: Global configuration
show ip igmp filtering
Displays the current IGMP Filtering parameters.
Command mode: All except User EXEC
IGMP filter definition
The following table describes the IGMP Filter Definition commands.
Table 141 IGMP Filter Definition commands
Command Description
ip igmp profile <1-16> range <IP
multicast address> <IP multicast
address>
Configures the range of IP multicast addresses for this filter.
Enter the first IP multicast address of the ranger, followed by the
second IP multicast address of the range.
Command mode: Global configuration
ip igmp profile <1-16> action
{allow|deny}
Allows or denies multicast traffic for the IP multicast addresses
specified.
Command mode: Global configuration
ip igmp profile <1-16> enable
Enables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16> enable
Disables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16>
Deletes this filter’s parameter definitions.
Command mode: Global configuration
show ip igmp profile <1-16>
Displays the current IGMP filter.
Command mode: All except User EXEC
IGMP filtering port configuration
The following table describes the IGMP Port Filtering Configuration commands.
Table 142 IGMP Filtering Port commands
Command Description
[no] ip igmp filtering
Enables or disables IGMP Filtering on this port.
Command mode: Interface port
ip igmp profile <1-16>
Adds an IGMP filter to this port.
Command mode: Interface port
no ip igmp profile <1-16>
Removes an IGMP filter from this port.
Command mode: Interface port
show interface port {<port
number>} igmp-filtering
Displays the current IGMP filter parameters for this port.
Command mode: All except User EXEC

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English