HP Integrity BL860c - Page 153

Table 31 EFI Commands
DefinitionBCH Command Parameters (PA-RISC)BCH Command
Equivalent
(PA-RISC)
EFI Shell Command
These commands are found in all other menus
Boot from specified path[PRI|HAA|ALT|<path>]Bootinfo boot
Display help for specified command
or menu
[<menu>|<command>]HElphelp <command>
Reset the server (to allow
reconfiguration of complex)
RESETreset
Return to the main menuMAinexit (at EFI Shell)
MAin
Display or modify a path[PRI|HAA|ALT|CON|KEY|<path>]PAthEFI boot manager
“change boot order”
Search for boot devices[ALL]SEArchbcfg
Search for boot devices[DIsplay|IPL] [<path>]SEArchbcfg
Display or change scrolling
capability
[ON|OFF]ScRollmany commands
offer a [-b] parameter
to cause 25 line
breaks
COnfiguration
Display or set the auto start flag[BOot|SEarch|STart] [ON|OFF]AUtoautoboot
Display or set processor boot
identifier
[<processor #>[<bootid #>]]BootIDinfo boot
Display boot-related informationBoot infoEFI boot manager
Seconds allowed for boot attempt[0-200]BootTimerautoboot
Config/deconfig processor[<proc>][ON|OFF]]CPUconfigcpuconfig
Config primary console[index][ON|OFF|primary]Console configconconfig
Deconfigure or reconfigure I/O
components or settings
IOCONFIG [fast_init | mps_optimize
| wol [on | off]]
IOCONFIGioconfig
Display or set boot tests execution[ON|OFF] or [test] [RUN|SKIP]FastBootboottest
Read or set the date[cn:yr:mo:dy:hr:mn[:ss]]Timedate
Read or set the real time clock[cn:yr:mo:dy:hr:mn[:ss]]Timetime
INformation
Display all server informationALLinfo all
Display boot-related informationBootINfoinfo boot
Display cache informationCAcheinfo cpu
Display revision number of major
VLSI
ChipRevisionsinfo chiprev
Display FRU informationFRUiLO 2 MP command
<df>
Display firmware version for PDC,
ICM, and complex
FwrVersioninfo fw
Extensible Firmware Interface 153