5. Choose the OS.
6. Choose the firmware category you want to download.
7. Download the firmware to a CD.
Install the Latest Version of Firmware on the Server
To install the firmware on the server:
1. Connect to the server console. See “Accessing the Integrated Lights Out 2 Management
Processor” (page 40).
2. Make sure the external USB DVD drive is connected and turned on. See “Installing the OS
Using a USB DVD Drive and the OS Disks” (page 66).
3. Insert the CD with the copy of the latest version of firmware into the external DVD drive.
4. Use the EFI Boot Manager Menu and boot to the drive that contains the CD with the updated
firmware.
5. Follow the instructions to update the firmware.
Verify and Install the Latest Firmware 65
To Next Page
Loading...
