Figure 2 ISPF Panel System (2 of 2)
Operating Procedures
There is no restriction on the case and type of characters entered.
The maximum length of the entered characters is determined by the length of the input fields. A
validation check takes place after input.
After entering the data, confirm the entry by pressing Enter.
NOTE: During execution of Business Continuity Manager, you must not perform ISPF operations
that involve execution of the following:
• YKSTART command
• Scripts that execute Business Continuity Manager
Function Keys
Function keys, which are common among panels, are described in the following list. Available
function keys are displayed at the bottom of each panel. See each panel description for available
function keys.
These keys are also referred to as PF (program function) keys. In this document, PF keys and function
keys are the same key (for example, PF3=F3), unless noted otherwise.
• F1=Help: Displays Help information for the panel
• F3=Exit: Terminates ISPF or returns to the previous panel
• F4=Refresh: Refreshes the display
• F6=Sort: Sorts the displayed information
• F7=Backward: Scrolls up the display
10 ISPF Panels
To Next Page
Loading...
Need help?
General