Figure 15 Set Defaults Panel
NOTE: When entering a DAD ID, remember the following:
• Specify the same DAD ID for volumes that can be directly accessed. Business Continuity
Manager assumes that volumes with the same DAD ID as the one specified for the Set Defaults
panel can be directly accessed.
• For BC, the same DAD ID must be specified for P-VOL and S-VOL. However, when defining
a Non Gen'ed volume and a Gen'ed volume inside the same storage system as a BC copy
pair, specify the respective values (the DAD ID used during an NG scan and the DAD ID used
during a local scan).
Manage Licenses Panel (License Management)
The Manage Licenses panel is displayed when 2 Manage Licenses is selected in the Main Menu
panel. In the Manage Licenses panel, you can register licenses or display license information.
The Manage Licenses panel is shown in Figure 16 (page 30).
Manage Licenses Panel (License Management) 29
To Next Page
Loading...
