Command Control Address (CCA) Selection List Panel
If s is specified in AC in the Control Unit Selection List panel, the Command Control Address (CCA)
Selection List panel with details about the selected CU is displayed.
The Command Control Address (CCA) Selection List panel is shown in Figure 27 (page 41).
Figure 27 Command Control Address (CCA) Selection List Panel
Table 21 (page 41) describes the items in the Command Control Address (CCA) Selection List
panel.
Table 21 Contents of the Command Control Address (CCA) Selection List Panel
DescriptionItem
DAD ID to which a device belongsDevice Address Domain
Description of the storage system to which a device belongsDescription
Serial number of the storage system to which a device belongsStorage System S/N
Model of the storage system to which a device belongsModel
Microcode information for the storage system to which a device belongsuCode
Interface version of the storage system to which a device belongsIFType
Number of the CU to which a device belongsControl Unit
SSID of the CU to which a device belongsSSID
The two leftmost characters indicate the CCA of the device in hexadecimal
format.
The rightmost character indicates, whether the CCA is an external volume.
The values are:
• +: An external volume
• -: Not an external volume
• (blank): The volume attribute is unknown because it was not requested.
CCA
Discover/Define Configuration Panel (Configuration File Definition) 41
To Next Page
Loading...
Need help?
General