Before creating copy groups, you must scan the volumes to be used and then create the disk
configuration definition files. If the disk configuration definition files exist, the scanning is not
required.
Discover HP Storage System Panel
The Discover HP Storage system panel is displayed when 1 Discover HP Storage System is selected
in the Discover/Define Configuration panel. The Discover HP Storage System panel displays a list
of storage systems detected by performing a scan.
Figure 19 (page 32) shows the transitions of the operation panel starting from the Discover HP
Disk Storage System panel.
Figure 19 Panel Transition from the Discover HP Disk Storage System Panel
The Discover HP Storage Arrays panel is shown in Figure 20 (page 33).
32 ISPF Panels
To Next Page
Loading...
