Figure 24 Edit Device Number for CU Panel
Table 18 (page 39) describes the items in the Edit Device Number for CU panel.
Table 18 Contents of the Edit Device Number for CU Panel
DescriptionItem
Serial number of the storage system to which the CU belongsStorage System S/N
Control unit numberCU
SSID of the CUSSID
Specify the first dummy device number assigned to the CUStart of Device Number
Storage System/DADID Selection List Panel
When s is specified for AC in the Scan Device Address Extent panel, the Storage System/DADID
Selection List panel is displayed. The Storage System/DADID Selection List panel displays storage
system serial numbers and DAD IDs that have been NG-scanned. To perform a scan again, select
storage system serial numbers and DAD IDs that have been NG-scanned from this panel.
Figure 25 (page 39) shows the Storage System/DADID Selection List panel.
Figure 25 Storage System/DADID Selection List Panel
Table 19 (page 39) describes the items in the Storage System/DADID Selection List panel.
Table 19 Description of Storage System/DADID Selection List Panel
DescriptionItem
Specify an action.
• s: Specify this option to select the DAD IDs and storage system serial numbers
to be NG-scanned. The DAD IDs and storage system serial numbers for
which s is specified and displayed in the Scan Device Address Extent panel.
AC
Storage system serial number that can be specified.S/N
DAD ID that can be specified.Device Address Domain
The Storage System/DADID Selection List panel displays the DAD IDs or storage system serial
numbers that were specified in the Scan Device Address Extent panel. If any Non Gen'ed volumes
have been scanned, their DAD IDs and storage system serial numbers are also displayed.
Discover/Define Configuration Panel (Configuration File Definition) 39
To Next Page
Loading...
Need help?
General