In the initial state, the entries are displayed in ascending order of EBCDIC codes, with S/N followed
by Device Address Domain in the priority order.
Control Unit Selection List Panel
If s is specified in the AC column in the Discover HP Storage System panel, the Control Unit Selection
List panel displays a list of all detected CUs.
The Control Unit Selection List panel is shown in Figure 26 (page 40).
Figure 26 Control Unit Selection List Panel
Table 20 (page 40) describes the items in the Control Unit Selection List panel.
Table 20 Contents of the Control Unit Selection List Panel
DescriptionItem
DAD ID to which the CU belongsDevice Address Domain
Description of the storage system to which the CU belongsDescription
Serial number of the storage system to which the CU belongsStorage System S/N
Model of the storage system to which the CU belongsModel
Microcode information for the storage system to which the CU belongsuCode
Interface version of the storage system to which the CU belongsIFType
Setting for use of the copy type by the storage system.
• Y— Copy type can be used.
• N— Copy type cannot be used.
CASoftware Keys
CAA
BC
CAJ
Specify an action:
s— Displays the Command Control Address (CCA) Selection List panel used
to display a list of volumes in the CU.
AC
Control unit numberCU
SSID of the CU.
If the CU has multiple SSIDs, one of them is displayed.
SSID
40 ISPF Panels