HP StorageWorks P9000

Table 81 Contents of the Volume Query Information (CA) Panel (continued)
DescriptionItem
Freeze the storage system (place in SCP status)
when a failure suspension (SUSPER) occurs.
5, 1
• Y: Places in SCP status.
• N: Does not place in SCP status.
If one of the following conditions is satisfied,
N/A is displayed:
• The consistency group ID is not registered
in the storage system.
• The Open/MF Consistency Preservation
Function is not used.
• Information cannot be acquired.
Freeze SCP :
4
Unit of difference management
5
DIF UNIT
Whether data on the P-VOL and the S-VOL is
inconsistent (the CONSLOST status) due to the
copy process of the related Compatible
FlashCopy being interrupted during execution
of the Preserve Mirror function.
• Y: Copy process of the related Compatible
FlashCopy was interrupted.
• N: Normal status
This item is displayed in the format
P-VOL-status-S-VOL-status.
In either of the following cases, N/A is
displayed:
• SIMPLEX is displayed for Status under both
Primary Volume and Secondary Volume.
• The information cannot be obtained.
CONSLOST(P-S)
The following information is displayed if there
are any other copy pairs apart from the one
specified in the Copy Group Pair Status panel.
• Copy type
• Indication of whether it is information on
the P-VOL or S-VOL (Pri or Sec)
TypePrimary/SecondaryOther CopyPair
Information
6
Consistency group ID and subconsistency
group ID
C/T ID
• For Primary: storage system serial number
for the P-VOL of the copy pair specified in
the Copy Group Pair Status panel
• For Secondary: storage system serial
number for the S-VOL of the copy pair
specified in the Copy Group Pair Status
panel
SN
Manage Copy Groups Panel (Copy Group Operation) 143