Table 85 Contents of the Suspension Options Panel (continued)
DescriptionItem
Specify the ATTIME parameter (ATTIME suspend time) of the
YKSUSPND command.
Before the ATTIME parameter is specified, the current date and time
are displayed in Preset Data and Preset Time.
Scheduled suspend time is determined by Preset Data, and Preset Time
by adding Plus Minutes and Plus Seconds. An ATTIME suspend time
more than 65,536 minutes after the execution of command cannot
be specified If the CAJ ATTIME suspend function is not used, this
cannot be specified for a remote storage system.
To check the specified time in another way, see the ISPF log.
Format of the ATTIME suspend time is as follows:
• YYYY: Specify the year (1970 to 2042)
• MM: Specify the month (01 to 12)
• DD: Specify the date (01 to 31)
• HH: Specify the time (00 to 23)
• MM: Specify the minute (00 to 59)
• SS: Specify the second (00 to 59)
• mmmm: Specify the offset value to be added to the ATTIME suspend
time in minute (0000 to 1439)
• ss: Specify the offset value to be added to the ATTIME suspend
time in second (00 to 59)
Preset Date YYYYMMDD
Preset Time HHMMSS
Plus Minutes MMMM
Plus Seconds SS
Specify the TIMEOUT parameter of the YKSUSPND command in
minutes (from 0 to 9999).
The specified value is used as the timeout value when the CAJ ATTIME
suspend function is used.
Timeout Minutes MMMM
Specify the ATTIME parameter (the time used as the ATTIME suspend
time) of the YKSUSPND command by using the number.
LOCAL: Uses the local time as the ATTIME suspend time.
GMT: Uses Greenwich Mean Time as the ATTIME suspend time.
LOCAL or GMT
Specify the value of the YKSUSPND command ATOPT parameter that
corresponds to the type of ATTIME suspend function you want to use.
• NORMAL: Uses the NORMAL ATTIME suspend function. For details
on whether the secondary volumes can be accessed or updated
while a BC copy group for which NORMAL is specified is being
transitioned to suspend mode, see the Business Copy for Mainframe
Systems UserGuide: HP XP24000 Disk Array, HP XP20000 Disk
Array.
• CAJ(Steady): Uses the CAJ ATTIME suspend function. The copy
group runs in STEADY mode during its transition to suspend mode.
• CAJ(Quick): Uses the CAJ ATTIME suspend function. The copy
group runs in QUICK mode during its transition to suspend mode.
When a BC copy group for which the ATTIME function is not enabled
is being used, use Suspend Option to specify the mode that is active
during the transition to suspend mode.
Preset Mode
164 ISPF Panels
To Next Page
Loading...
