In the Resync Options panel, if Y is specified in the Overwrite ONLINE target volume and the
F3=Exit key is pressed, the Confirm Overwrite ONLINE Target Volume panel is displayed, as shown
in “Confirm Overwrite ONLINE Target Volume Panel” (page 182). This panel provides a warning
that the contents of the online target volume (S-VOL) will be overwritten when the YKRESYNC
command is executed.
“Contents of the Resync Options Panel” (page 167) describes the items in the Resync Options panel.
Table 86 Contents of the Resync Options Panel
DescriptionItem
Copy group IDCopy Group ID
Specify the copy direction by using the number.
• AS-IS: When BC is used, AS-IS performs differential copying of the
contents of the P-VOL to the S-VOL. When CA, CAA, or CAJ is used,
AS-IS performs differential copying of the copy pairs that are in the
suspend status without changing the currently specified copy direction.
• Forward: Copies the contents of the P-VOL to the S-VOL.
• Reverse: Copies the contents of the S-VOL to the P-VOL.
Direction Option
Specify the SELECT parameter (indicating how to select the copy pair to
be operated) of YKRESYNC command by using the number.
• All: Selects all copy pairs as targets.
• Conditional: Select target copy pairs based on the volume status of
the copy pair.
You can specify this mode for BC.
Pair Selection
Specify the option of the copy mode by using the number.
• QUICK: Changes to DUPLEX status quickly.
• NORMAL: Changes to DUPLEX status after the copy finishes.
Copy Mode
Specify the DELTAJNL, ALLJNL, PREPARE, or ERRCHK parameter of the
YKRESYNC command by using the number.
• Delta-Journal: Executes a delta resync (the DELTAJNL parameter
is specified).
• All-Journal: Executes a delta resync with full copy (the ALLJNL
parameter is specified).
• Delta-Recover: Restores the HOLDER status copy pair to HOLD status
(the PREPARE parameter is specified).
• Delta-Journal(ERRCHK): Identifies the cause of an error during
delta resync (the DELTAJNL parameter and the ERRCHK parameter are
specified).
• All-Journal(ERRCHK): Identifies the cause of an error during delta
resync with full copy (the ALLJNL parameter and the ERRCHK parameter
are specified).
You can specify this mode for CAJ.
Resync Mode
Specify the ERRCHK parameter of the YKRESYNC command by using the
number.
• Delta-Journal: Identifies the cause of an error during delta resync.
• All-Journal: Identifies the cause of an error during delta resync with
full copy.
If you do not specify anything, YKRESYNC command is executed without
the ERRCHK parameter.
You can specify this option for CAJ.
Error Check Option
Manage Copy Groups Panel (Copy Group Operation) 167
To Next Page
Loading...
