HP StorageWorks P9000 - Page 331

Table 146 Copy Group Structure (continued)
DescriptionREXX variables
Primary storage system Model
• XP256
• XP48 or XP512
• XP128 or XP1024
• XP10000 or XP12000
• XP20000 or XP24000
• P9500
Model
Secondary device numberDevnSec
Secondary storage system serial numberSerialNum
Secondary CU numberCUNum
Secondary SSIDSSID
Secondary CCACCA
Secondary interface versionIFType
Secondary storage system Model
• XP256
• XP48 or XP512
• XP128 or XP1024
• XP10000 or XP12000
• XP20000 or XP24000
• P9500
Model
Table footnote key:
1
Information can be displayed only when information is obtained from secondary
site.
2
Average matching rate of copy pairs in a copy group.
3
Created for each CopyGroup information item. This value is the copy group
number.
4
Average matching rate of copy pairs in a copy group.
5
Created for each Stats information item.
6
Created for each Pair information item. The value is the copy pair number.
7
The value acquired from the primary site is set. If information is not acquired, the
value is 0. Note that if the copy type is BC, a value acquired from the Primary or
secondary site is set.
8
Effective only when timer type of C/T group is SYSTEM. If information is not
obtained, value is null.
9
The value is invalid when the copy type is CAJ.
10
The value is invalid.
11
The value is 1 when the EXCTG function is used.
12
Information can be acquired only when the EXCTG function is used.
13
Information can be acquired only when the EXCTG function is used during a
forward operation.
About REXX Variable Structures 331