Table 152 Path Set Structure (continued)
DescriptionREXX variables
Type of primary storage system
• XP48 or XP512
• XP128 or XP1024
• XP10000 or XP12000
• XP20000 or XP24000
• P9500
Model
Interface version of primary storage systemIFType
Primary path IDPathID
1
Primary SSIDSSID
2
Primary CU numberCUNum
The CCA of the device to which I/Os are issued when
path operations are performed on the primary site where
the path is used.
CCA
The device number of the device to which I/Os are issued
when path operations are performed on the primary site
where the path is used.
DEVN
Serial number of secondary storage systemSerialNumSec
Type of secondary storage system
• XP48 or XP512
• XP128 or XP1024
• XP10000 or XP12000
• XP20000 or XP24000
• P9500
Model
Interface version of secondary storage systemIFType
Secondary path IDPathID
1
Secondary SSIDSSID
2
Secondary CU numberCUNum
The CCA of the device to which I/Os are issued when
path operations are performed on the secondary site
where the path is used.
CCA
The device number of the device to which I/Os are issued
when path operations are performed on the secondary
site where the path is used.
DEVN
Number of defined physical paths from the primary site
to the secondary site (0 to 8)
0P2S
Status of a logical pathStatus
3
n
The initiator port number of the primary site of the logical
path (on the storage system indicated by
Pri.SerialNum)
portPri
The target port number of the secondary site of the logical
path (on the storage system indicated by
Sec.SerialNum)
portSec
About REXX Variable Structures 347
To Next Page
Loading...
