Table 165 Combinations of Target Statuses and Actions That Can Be Specified (continued)
Action
Target
status
YYYNYNNYYYYCONSLOST
YYYNYYYYYYYSUSPER
YYYNYYYYYYYNODELTA
YYYNYYYYYYYHOLDER
YYYNYYYYYYYSUSPCU
YYYYYNNYYYYSIMPLEX
YYYNYNNYYYYPENDING
YYYNNNNYYYYTRANS
YYYNYNNYYYYHOLDTRNS
YYYNYNNYYYYREVRSY
YYYNYYYYYYYSUSPVS
YYYNYYYYYYYSUSPOP
YYYNYYYYYYYHOLD
YYYNNNYYYYYSWAPPING
YYYNYYYYYYYDUPLEX
Legend
Y = This combination can be specified.
N = This combination cannot be specified.
Parameters
target-status
Specifies the status of the copy group on which the action is to be executed. For the specifiable
values, see “Combinations of Target Statuses and Actions That Can Be Specified” (page 370).
For details on how the copy group status is determined when there are multiple copy pair statuses
in the copy group, see “When there are multiple copy pair statuses in a copy group” (page 375).
action
Specifies the action to be executed if the copy group is in the target status. The copy group specified
in the YKMONCG file can be specified for the copy group ID in the ACTION parameter. This copy
group can be specified for copy group that has ACTIVE or INACTIVE status specified for
CGMONSTAT parameter.
“Values That Can Be Specified as Actions” (page 371) lists and describes the values that can be
specified as actions.
Table 166 Values That Can Be Specified as Actions
OverviewSpecifiable value
Does nothing.NOP
Stops BCM Monitor.EXIT(return-code)
Outputs report information.REPORT(copy-group-ID
[,{SUMMARY|DETAIL|STATS|RPO}[,{CONS|ERROR|STATUS|INFO}]])
YKMONCG File 371
To Next Page
Loading...
