HP StorageWorks P9000 - Page 382

(1)
The scan results of PPRC copy pairs are displayed. For details on the displayed
messages, see HP StorageWorks P9000 for Business Continuity Manager Software
Installation Guide. If a value of RC other than 0 displayed in the YKB001I message,
see the messages that were output before the YKB001I message for details.
Underlined values are values specified for each item in the Scan Copy Pair Inside Storage System
panel. The following indicates the correspondence between values specified for each item in the
Scan Copy Pair Inside Storage System panel and items to be displayed in the underlined values
in italics:
DEVN(value-specified-in-Device-Num-Start,value-specified-in-Device-Num-End)
DAD(value-specified-in-Primary,value-specified-in-Secondary,value-specified-in-BC-Pair-(S-VOL)-Non-Gen'ed)
CGNAME1(value-specified-in-CA-Copy-Group-ID) CGNAME2(value-specified-in-TCA-Copy-Group-ID)
CGNAME3(value-specified-in-BC-Copy-Group-ID) HS(value-specified-in-HS)
382 Example of the Scan Results of PPRC Copy Pairs