HP StorageWorks P9000 - 10 Support and Other Resources; Related Documentation

Table 64 Contents of the Scan Copy Pair Inside Storage System Panel
DescriptionItem
Specify the Device Address Domain ID to which the P-VOL of the PPRC
copy pairs to be scanned belong (required).
Use no more than 28 alphanumeric characters. If the specification
exceeds 8 characters, place a period every 8 characters. Hyphens
cannot be specified.
PrimaryDevice Address
Domain
Specify the Device Address Domain ID of the S-VOL of the PPRC copy
pairs to be scanned belong (required for CA or CAA).
Use no more than 28 alphanumeric characters. If the specification
exceeds 8 characters, place a period every 8 characters. Hyphens
cannot be specified.
Secondary
Specify the Non Gen'ed Device Address Domain ID to which the S-VOL
of the PPRC BC copy pairs to be scanned belong (required when the
S-VOL of the BC copy pair is a Non Gen'ed volume).
Use no more than 28 alphanumeric characters. If the specification
exceeds 8 characters, place a period every 8 characters. Hyphens
cannot be specified.
BC Pair (S-VOL) Non
Gen'ed
Specify a CA copy group name (required only when a Device Address
Domain ID is specified for Secondary).
Two-digit serial numbers beginning with 00 are assigned in ascending
order to the copy group names specified by this parameter (for
example, 00, 01, 02...). You can specify a maximum of six characters
for a copy group name. Do not use hyphens. The initial display is
MYTCS.
CA Copy Group ID
Specify a TCA copy group name (required only when a Device Address
Domain ID is specified for Secondary).
Two-digit serial numbers beginning with 00 are assigned in ascending
order to the copy group names specified by this parameter (for
example, 00, 01, 02...). You can specify a maximum of six characters
for a copy group name. Do not use hyphens. The initial display is
MYTCA.
TCA Copy Group ID
Specify a BC copy group name.
Two-digit serial numbers in ascending order beginning with 00 are
assigned to the copy group names specified by this parameter
(example: 00, 01, 02 ...). Use no more than 6 characters for the copy
group name. Hyphens cannot be specified. No initial value is
displayed.
BC Copy Group ID
Discover/Define Configuration Panel (Configuration File Definition) 95